SEAFLO Pumps, Blowers, Bilges and more

54-Series Diaphragm Water Pumps

54-Series Diaphragm Water Pumps

$109.99

54-Series Water Pressure Pump

Industry-Leading 4 Year Warranty!

The 54-Series is our Heavy-Duty water pump. It provides high volume water flow with reduced pump cycling, thanks to the large five-chamber diaphragm. These models are designed to run on water systems with no accumulator tank necessary, and up to five fixtures! It is also suited for use with a holding tank water system, as may be found in a boat, RV or remote cabin. It provides up to 5.5 gallons per minute, all are fitted with a built-in pulsation dampening by-pass to control unwanted cycling and noise. The 54-Series pumps are self-priming, and can run dry without damage, performance reliable and low current. This automatic demand water system pump has a built-in pressure switch, which automatically starts and stops the pump when the faucet is opened and closed. They are easy to install service and winterize.

SKU: N/A Categories: ,

Description

Features & Benefits

  • Positive displacement pump
  • Can run dry
  • Quiet operation
  • Demand Pump
  • Easy connect fittings
  • Industry standard mount pattern
  • Built-in thermal protection

Typical Applications

  • Agricultural Spraying
  • General Industrial
  • Automotive
  • Marine/RV
WATER PUMP
Type
5 chamber positive displacement diaphragm
pump, self priming, capable of being run dry
Mode
Demand
Liquid Temperature
140°F (60°C) Max.
Priming Capabilities
6 feet (1.8 m) suction lift
Max Pressure
60 PSI (4.1 bar)
Inlet/Outlet Ports
1/2″-14 MNPT
Weight
7 lbs (3.17 kg)
MOTOR
Duty Cycle
Continuous
Leads
14 AWG, 9.4″ long with/Leads
2-Pin connector
Voltage 
12v/24v

 

 

  • Heavy-Duty automatic demand water system pump
  • Built-in pressure switch automatically starts and stops pump when faucet is opened and closed
  • Capable of supplying up to 5 fixtures!
  • Self-priming so pump can be located in a location higher than the water tank
  • Run-dry safe
  • Built-in thermal protection

 

STANDARD DIAPHRAGM PUMP CONFIGURATIONS

Model Switch GPM/LPM PSI/BAR Draw (A) Valves Diaphragm Ports Voltage Wire Connections
SFDP1-030-060-54 Demand 3.0/11.3 60/4.1 12.0 Max EPDM Santoprene 1/2″-14 MNPT 12V DC 2-Pin/Leads
SFDP2-030-060-54 Demand 3.0/11.3 60/4.1 6.0 Max EPDM Santoprene 1/2″-14 MNPT 24V DC 2-Pin/Leads
SFDP1-040-060-54 Demand 4.0/15.1 60/4.1 15.0 Max EPDM Santoprene 1/2″-14 MNPT 12V DC 2-Pin/Leads
SFDP2-040-060-54 Demand 4.0/15.1 60/4.1 7.0 Max EPDM Santoprene 1/2″-14 MNPT 24V DC 2-Pin/Leads
SFDP1-050-060-54 Demand 5.0/18.9 60/4.1 17.0 Max EPDM Santoprene 1/2″-14 MNPT 12V DC 2-Pin/Leads
SFDP2-050-060-54 Demand 5.0/18.9 60/4.1 9.0 Max EPDM Santoprene 1/2″-14 MNPT 24V DC 2-Pin/Leads

 

Additional information

Weight 8 lbs
Dimensions 12 × 9 × 6 in
Flow

3.0 GPM, 4.0 GPM, 5.5 GPM

Voltage

12V DC, 24VDC

54 Series- General Information

54 Series- Instructions

 

Reviews

There are no reviews yet.

Be the first to review “54-Series Diaphragm Water Pumps”

Your email address will not be published. Required fields are marked *

You may also like…